Waste tyre pyrolysis plants have quite a few components, and they facilitate a recycling process that can prove extremely beneficial. Using a tire oil plant can turn tires into fuel, and there are two products that are left when you’re done. You get the fuel that you expect in liquid form, and you get gas fuel, too. What is the gas fuel for? It is used to power the reactor as you start the entire process over again to produce more liquid fuel from the recycled tires.
You can see that the reactor is where everything starts. This is where you put the raw materials into the waste tire pyrolysis equipment. Once you have the batch of tires in there, you just have to make sure the reactor is sealed and ready to go. The reactor is going to heat up to high temperatures, and as you can imagine, not even gases should be allowed to escape from the reactor.
The process is a simple one, but all steps must be followed appropriately. There are different types of ways you can fuel the reactor. In a previous paragraph, it was mentioned that you could use one of the end gas products to help fuel the reactor time and time again. While that is true, there are also other substances used like coal and wood. What do you plan to use as fuel to heat up the reactor? You definitely need to make sure you have the fuel in place. A continuous waste tyre pyrolysis plant is easier to operate. Here is a video from Beston Group showing the entire process.
Do you know what temperature is required to heat up the tires to the point they turn into liquid gas? That reactor has to heat up to right around 250 degrees. What’s the next stop for the liquid the oil that leaves the reactor? It’s on its way to the condensing system after that. This is where the oil gets divided into two types of substances. Essentially, the oil gas is being liquefied, but not all of it can go through that process. As a top waste tyre recycling plant supplier, Beston can provide you with the top quality machines to lower your waste tyre recycling plant cost.
So you wind up with gas and liquid oil. Reusing that gas is part of how you are going to reduce energy costs for your waste tyre pyrolysis plant. There is a feeder system by the way that is going to get the tires to the reactor. This is also a patent technology of Beston Machinery. And while it was mentioned that the temperature of the reactor has to get up to at least 250 degrees, the temperature can indeed get up to 500 degrees, which is double. And Beston also has covered a casing on the pyrolysis machine to protect the workers from high temperature.
You can get more than just pyrolysis oil from the tires. There is also steel wire as a product and carbon black, too. What do you think about the features of a waste tyre pyrolysis plant? You just have to let the machine do its work after you have followed all the necessary steps. These plants are very beneficial in many ways, and they make it to where the tires are used for various purposes. It’s all about the recycling process.